ip ospf interface md5 key
Configures the OSPF key string. This interface MD5 string, along with the key identification number,
enables the interface to encode MD5 encryption.
ip ospf interface {interface_name} md5 key_id key key_string
Syntax Definitions
interface_name
key_id
key_string
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command is used in conjunction with the commands described above on
22-34.
•
For MD5 authentication to function properly the same key string must be configured on the neighbor-
ing router for that interface.
Examples
-> ip ospf interface vlan-101 md5 100 key 1
Release History
Release 6.1; command was introduced.
Release 6.2.1; ip_address parameter deprecated.
Related Commands
ip ospf interface auth-type
ip ospf interface md5
show ip ospf interface
page 22-36
The name of the interface.
The key ID. The valid range is 1–255.
A key string.
Sets the OSPF interface authentication type.
Creates and deletes the OSPF interface MD5 key identification
number.
Displays the status and statistics of an OSPF interface.
page 22-30
OmniSwitch CLI Reference Guide
OSPF Commands
and
page
June 2012