Show Wireless Ap-Scan Results - Extreme Networks ExtremeWare Command Reference Manual

show wireless ap-scan results

show wireless ap-scan results {detail}
Description
Displays a switch-wide, correlated view of the results of the access point (AP) scan.
Syntax Description
detail This optional keyword, provides more in-depth information.
Default
N/A
Usage Guidelines
Use this command to see the results of an AP scan. Use the optional keyword,
fields in Table 25.
Table 25: AP Scan Results (Alphabetized)
Data Value
APMAC
Capability
Channel
ESS Name
Last Update
Min/Max/Avg RSS
Network Type
Number of beacons
Number of probe resp
Supported Rate Set
WEP required/WEP
authentication supported
WPA
Example
The following command displays information about the AP scan.
show wireless ap-scan results
The output from the command is similar to:
AP Mac Address
ExtremeWare 7.5 Command Reference Guide
Description
MAC address of the discovered AP
Capability field from a received information packet (in detail output only)
The channel on which this AP was discovered
String ESS ID I.E.
Time value at which this entry was updated
Received Signal Strength statistics
Ad-hoc or BSSID network (in detail output only)
Count of beacon packets seen from this AP (in detail output only)
Count of PROBE RESP packets sent from the AP (in detail output only)
List of supported rates
WEP information from beacon and probe packets
WPA information, including authentication and supported encryption algorithms
Intf ESS Name AvgRSS Type Chan WEP WPA Last
show wireless ap-scan results
, to see all of the
detail
1335