Show Wireless Ports Interface Ap-Scan Configuration - Extreme Networks ExtremeWare Command Reference Manual

show wireless ports interface ap-scan configuration

show wireless ports [<portlist> | all] interface [1 |2] ap-scan
configuration {detail}
Description
Displays the current configuration of the scan feature for the selected ports and interface.
Syntax Description
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
detail Specifies to display the information in detailed format.
Default
N/A
Usage Guidelines
Use this command to see the current configuration of the AP scan feature for the specified wireless port
and interface. Use the optional keyword,
Examples
The following example displays the configuration of port 1:5 and interface 1:
show wireless ports 1:5 interface 1 ap-scan configuration
The output of the command is similar to:
Intf En
-------------------------------------------------------------------------------
1:5:1 N
The following example shows the extra details shown when the keyword
command:
show wireless ports 1:5 interface 1 ap-scan configuration detail
The output of the command is similar to:
Interface
Enabled
Send Added Trap
Send Removed Trap
Send Updated Trap
Probe Interval
Send Probe
Result Table Size
ExtremeWare 7.5 Command Reference Guide
detail
Add Rem Update Probe ProbeInt OCS Cont. Size Timeout Channels
off off off off
: 1:5:1
: N
: off
: off
: off
: 100 (msec)
: N
: 128
, to see the detailed or expanded configuration.
100 N N 128
show wireless ports interface ap-scan configuration
300
is added to the
detail
1347