Show Wireless Ports Configuration - Extreme Networks ExtremeWare Command Reference Manual

show wireless ports configuration

show wireless ports [all | <portlist>] configuration
Description
Displays a summary of the wireless configuration.
Syntax Description
all Specifies all active ports.
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.
Default
N/A
Usage Guidelines
Use this command to review the configuration of one or more wireless ports.
Example
The following example displays a summary report of all the configured wireless ports:
show wireless ports all configuration
The output of the command is similar to:
Port IP Address
------------------------------------------------------------------------------
1:1 0.0.0.0
1:2 0.0.0.0
1:3 0.0.0.0
1:4 0.0.0.0
1:5 0.0.0.0
1:6 0.0.0.0
1:7 0.0.0.0
1:8 10.211.37.83
1:9 0.0.0.0
1:10 0.0.0.0
1:11 0.0.0.0
1:12 0.0.0.0
1:13 0.0.0.0
1:14 0.0.0.0
1:15 0.0.0.0
1:16 0.0.0.0
1:17 0.0.0.0
1:18 0.0.0.0
1:19 0.0.0.0
Press <SPACE> to continue or <Q> to quit:
ExtremeWare 7.5 Command Reference Guide
Location Descr Ant-Loc TOut HealthChk State
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
Unknown Location indoor
show wireless ports configuration
600 on EN
600 on DIS
600 on DIS
600 on DIS
600 on DIS
600 on DIS
600 on DIS
600 on EN
600 on DIS
600 on DIS
600 on DIS
600 on DIS
600 on DIS
600 on DIS
600 on DIS
600 on DIS
600 on DIS
600 on DIS
600 on DIS
1343