Show Wireless Ports Debug-Trace - Extreme Networks ExtremeWare Command Reference Manual

show wireless ports debug-trace

show wireless ports [all | <portlist>] debug-trace {detail}
Description
Displays whether debug-trace is enabled on one or more ports.
Syntax Description
all Specifies all active ports.
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form 1,
2, 1:2, 3-5.
detail Displays all the available information.
Default
N/A
Usage Guidelines
Use this command to review the debug-trace status on a port.
Example
The following example displays a summary report of the status of debug-trace on all wireless ports:
show wireless ports all debug-trace
The output of the command is similar to:
Wireless Port
Messages Sent
Total Bytes Sent
Messages Suppressed
Other Errors
Trace
-----------------------------------------------------------------------------
dot1x
radius
mac
snmp
wlan-driver
eth-driver
ap-scan
client-diag
mac-radius
wpa
iapp
Wireless Port
Messages Sent
Total Bytes Sent
ExtremeWare 7.5 Command Reference Guide
: 1:8
: 0
: 0
: 278409
: 0
Description
802.1x Processing
Radius Backend
Wireless MAC
SNMP Subagent
WLAN Driver
ETH Driver
AP Scan
Client Diag
MAC Radius
WPA State Machine
IAPP
: 1:25
: 0
: 0
show wireless ports debug-trace
CUR MSGS BYTES SUPP
0 0 0 69058
0 0 0 0
0 0 0 34
0 0 0 1980
0 0 0 0
0 0 0 0
0 0 0 46
0 0 0 6
0 0 0 0
0 0 0 207152
0 0 0 133
1345