This Command Is Available On The Summit 300-48, Summit 300-24, Summit 400-24P And Alpine Switches.show Wireless Ports Interface Ap-Scan Results - Extreme Networks ExtremeWare Command Reference Manual

This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.show wireless ports interface ap-scan results

This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine
show wireless ports interface ap-scan results
switches.
show wireless ports [<portlist> | all] interface [1 | 2] ap-scan results
{detail}
Description
Displays information about the results of an access point (AP) scan from the port perspective.
Syntax Description
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
detail (Optional) Specifies to display the information in detailed format.
Default
N/A
Usage Guidelines
Use this command to see the results of an AP scan. Use the optional keyword,
fields in Table 25.
Table 26: AP Scan Results (Alphabetized)
Data Value
APMAC
Capability
Channel
ESS Name
Last Update
Min/Max/Avg RSS
Network Type
Number of beacons
Number of probe resp
Supported Rate Set
WEP required/WEP
authentication supported
WPA
ExtremeWare 7.5 Command Reference Guide
Description
MAC address of the discovered AP
Capability field from a received information packet (in detail output only)
The channel on which this AP was discovered
String ESS ID I.E.
Time value at which this entry was updated
Received Signal Strength statistics
Ad-hoc or BSSID network (in detail output only)
Count of beacon packets seen from this AP (in detail output only)
Count of PROBE RESP packets sent from the AP (in detail output only)
List of supported rates
WEP information from beacon and probe packets
WPA information, including authentication and supported encryption algorithms
, to see all of the
detail
1349