Show Ospf Area - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

show ospf area

show ospf area
show ospf area {<area-identifier>}
Description
Displays information about OSPF areas.
Syntax Description
area-identifier Specifies an OSPF area.
Default
N/A.
Usage Guidelines
None.
Example
The following command displays information about OSPF area 1.2.3.4:
show ospf area 1.2.3.4
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1593
ExtremeWare XOS 11.5 Command Reference Guide