Show Wireless Client-Scan Results - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

show wireless client-scan results

show wireless client-scan results {{detail }| {<mac-address> {detail}}
Description
Displays information about client scan results, optionally by MAC address from the client scan results
table.
Syntax Description
detail Provides more in-depth information.
mac-address Specifies the MAC address of the client network interface card.
Default
N/A
Usage Guidelines
Use this command to get information about client scan results. Use the detail option to get further
details of the client scan.
Examples
The following example displays information about the wireless configuration:
show wireless client-scan results
The output of the command is similar to:
Source : 00:04:23:90:03:91
Intf Probe
1:25:2 100337
LastRSS LastRate LastChan
12 0
Source : 00:05:4E:48:45:F8
Intf Probe
1:25:2 985
1:25:1 958
LastRSS LastRate LastChan
21 0
19 0
1338
ProbeResp FirstSeen LastChange
0 21:46:47
6
ProbeResp FirstSeen LastChange
0 23:06:41
0 23:06:50
6
40
23:41:43
23:41:36
23:41:38
ExtremeWare 7.5 Command Reference Guide