Configuring An Explicit Server Ip Address - Brocade Communications Systems Brocade 8/12c Installation Manual

18. Click Test to test the connection.
NOTE
You can also use the Windows ODBC Driver Manager to add the DSN for the LINUX database server.
19. Click OK on the Connection Test dialog box.
20. Click Save.
21. Click OK on the ODBC Data Source Administrator dialog box.

Configuring an explicit server IP address

If you selected a specific IP address from the Server IP Configuration screen during installation and the selected IP
address changes, you will not be able to connect to the server. To connect to the new IP address, you must manually
update the IP address information.
To change the IP address, complete the following steps.
1. Choose one of the following options:
•
On Windows systems, select Start > Programs > Network Advisor 11.X.X > Network Advisor Configuration.
•
On UNIX systems, execute sh Install_Home/bin/configwizard in terminal.
2. Click Next on the Welcome screen.
3. Click Yes on the confirmation message.
4. Click Next on the FTP Server screen.
5. Complete the following steps on the Server IP Configuration screen.
FIGURE 14
Server IP Configuration screen
a. Select an address from the Server IP Configuration list.
b. Select an address from the Switch - Server IP Configuration Preferred Address list.
If DNS is not configured for your network, do not select the "hostname" option from either the Server IP
Configuration or Switch - Server IP Configuration Preferred Address list. Selecting the "hostname" option
prevents clients and devices from communicating with the server.
c. Click Next.
Brocade Network Advisor Installation Guide
53-1002320-01
Configuring an explicit server IP address
41 of 47