Configuring the KMIP server
1. From the KeySecure Management Console, select the Device tab, then select Device
FIGURE 308
2. Under Cryptographic Key Server Settings, select KMIP as the protocol.
3. Ensure that the Use SSL check box is selected.
4. Click Edit to open a dialog box for changing IP, Port, and Server Certificate settings.
5. After changing/adding your settings, save your settings.
Brocade Network Advisor SAN User Manual
53-1003154-01
Steps for connecting to a KMIP-compliant SafeNet KeySecure
Configuration > Key Server > Key Server.
The Cryptographic Key Server Configuration page displays. (Refer to
KeySecure Cryptographic Key Server Configuration page
You are returned to the Cryptographic Key Server Configuration page. The settings are
displayed in the table.
20
Figure
308.)
759