Cee Administrator's Guide; In This Chapter; Documentation Updates For Fabric Os V6.4.0; Chapter 3, Standard Cee Integrations And Configurations - Brocade Communications Systems StoreFabric SN6500B Documentation Update

CEE Administrator's Guide

In this chapter

The updates in this chapter are for the CEE Administrator's Guide, published March 2010 and
October 2010.

Documentation updates for Fabric OS v6.4.0

Chapter 3, Standard CEE Integrations and Configurations

Under the heading of "Creating the CEE map" on page 25, before the beginning of the procedure,
add the following note:
Under the heading of "Minimum CEE configuration to allow FCoE traffic flow" on page 29, add the
following note:

Chapter 9, Configuring QoS using the CEE CLI

Under the heading of "Creating a CEE map" on page 107, add the following note:
Under the heading of "Creating a CEE map" on page 107, delete the example under step 2.
Under the heading of "Defining a priority group table" on page 107, add the following note:
Fabric OS Documentation Updates
53-1002063-09
•
Documentation updates for Fabric OS v6.4.0 . . . . . . . . . . . . . . . . . . . . . . . . . 3
•
Documentation updates for Fabric OS v6.4.1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
NOTE
The name used in the cee-map command must begin with a letter, and can consist of letters,
digits, hyphens, and underscore characters. Spaces are prohibited. Special characters are not
supported, and cause the name to truncate.
NOTE
The name used in the cee-map command must begin with a letter, and can consist of letters,
digits, hyphens, and underscore characters. Spaces are prohibited. Special characters are not
supported, and cause the name to truncate.
NOTE
The name used in the cee-map command must begin with a letter, and can consist of letters,
digits, hyphens, and underscore characters. Spaces are prohibited. Special characters are not
supported, and cause the name to truncate.
Chapter
2
3