Creating A Client On Tems - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

18
2. Enter the management IP address information under Management Interface.
3. Enter the client IP address information under KM Server Interface.
4. Enter a host name for the appliance, internet or intranet domain, and, if used, the primary and
5. Set Service Settings as shown in

Creating a client on TEMS

This step assumes that the group brocade has been created by an administrator. If the group
brocade does not exist, you must log in to TEMS as officer, create the group, and assign the group
to a manager.
1. From the Encryption Center, select a switch that needs to have a TEMS Client.
2. Select Properties.
3. Select the Key Vault User Name button.
FIGURE 159
4. Copy the user name in the User Name field.
5. Log in to the Thales management program as a manager who has been assigned to the
6. Select the Clients tab
482
secondary DNS IP address under Common Settings.
-
HTTPS Port 433
-
SSH Port 22
-
Enable SSH
-
KM Server Port 9000
-
Enable KM Server
The Key Vault User Information dialog box displays
TEMS Key Vault User Information
brocade group.
(Figure
Figure 158.
(Figure
160).
159).
DCFM Professional Plus User Manual
53-1001774-01