Creating A Client On Teka - Brocade Communications Systems WFT-2D User Manual

20
Steps for connecting to a TEKA appliance

Creating a client on TEKA

This step assumes the group brocade has been created by an administrator. If the group brocade
does not exist, you must log in to TEKA as officer and create the group, then assign the group to a
manager.
1. From the Encryption Center Devices table, select a switch that needs to have a TEKA client,
2. Click Key Vault User Name.
FIGURE 282
3. Copy the user name in the User Name field.
4. Log in to the Thales management program as a manager who has been assigned to the
5. Select the Clients tab. (Refer to
FIGURE 283
736
then select Properties.
The Key Vault User Information dialog box displays. (Refer to
TEKA Key Vault User Information
brocade group.
TEKA Clients tab
Figure 283.)
Brocade Network Advisor SAN User Manual
Figure 282.)
53-1003154-01