4.6 Keypad Operation
8.
Push
or
9.
When you are done changing the value, push
The procedure to set the backlight to turn OFF automatically is complete.
◆
Show Information about the Drive
The procedure in this section shows how to show the drive model, maximum applicable motor output (HD/ND),
rated output current (HD/ND), software version, and the serial number on the keypad.
1.
Push
[Home] to show the HOME screen.
Note:
• The keypad will [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push
[Menu].
3.
Push
or
4.
Push
or
The keypad will show the drive information.
182
to select the digit, then push
, push
[Back] to show [Home] on
to select [Diagnostic Tools], then push
to select [Drive Information], then push
or
to change the value.
.
.
.
.
YASKAWA SIEPC71061705H GA700 Series Technical Manual