YASKAWA GA700 Series Technical Manual page 337

Code Name
oFb11 Option Ope Mode Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb12 Drive Receive CRC Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb13 Drive Receive Frame Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb14 Drive Receive Abort Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb15 Option Receive CRC Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb16 Option Receive Frame Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb17 Option Receive Abort Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFC00 Option Not Compatible with Port
Note:
• Do a Fault Reset to clear the fault.
• Fault trace is not available for these faults.
Code Name
oFC01 Option Fault/Connection Error
Note:
Do a Fault Reset to clear the fault.
YASKAWA SIEPC71061705H GA700 Series Technical Manual
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Causes
The option connected to connector CN5-C is not
compatible.
Causes
The option card connected to connector CN5-C was
changed during operation.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Possible Solutions
Connect the option to the correct connector.
Note:
AI-A3, DI-A3, and communication options cannot be
connected to the CN5-C connector.
Possible Solutions
1. De-energize the drive.
2. Refer to the option card manual and correctly connect the
option card to the connector on the drive.
7.4 Fault
7
337