Set Parameters Using The Setup Wizard - YASKAWA GA700 Series Technical Manual

9.
Push or
10.
When you are done setting the time, push
The procedure for setting the date and time is complete.
◆

Set Parameters Using the Setup Wizard

The Setup Wizard lets users follow simple messages on the keypad to set these basic parameters:
• Frequency Reference Source
• Input signal level
• Run command source
• Duty Rating
• Motor type
• Control Method Selection
• Maximum frequency
• Input/output settings
Note:
The Setup Wizard function will initialize all parameters before it sets the basic parameters.
1.
Push [Home] to show the HOME screen.
Note:
• The keypad will [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push [Menu].
3.
Push or
YASKAWA SIEPC71061705H GA700 Series Technical Manual
to select the hour or minute, then push
, push [Back] to show [Home] on
to select [Initial Setup], then push
or to change the value.
.
.
.
4.6 Keypad Operation
175
4