4.6 Keypad Operation
2.
Push
(Menu).
3.
Push
or
4.
Push
or
5.
Push
or
6.
Push
or
7.
When you complete changing the value, push
The procedure to set the sampling time is complete.
◆
Set Backlight to Automatically Turn OFF
You can set the backlight of the keypad screen to automatically turn OFF after a set length of time since the last
key operation on the keypad. The procedure in this section shows how to turn ON and turn OFF the backlight.
180
to select [Diagnostic Tools], then push
to select [Data Logger], then push
to select [Log Sampling Interval], then push
to select the digit, then push
.
(Setup).
.
or
to change the value.
.
YASKAWA SIEPC71061705H GA700 Series Technical Manual