YASKAWA GA700 Series Technical Manual page 47

A - Keypad
B - Keypad connector
3.
Use the screws included with the mounting bracket, and attach the keypad to the mounting bracket.
Use the screws included with the installation support set to attach it. Tighten the screws to a correct
tightening torque:
• M3 screws: 0.49 N∙m to 0.73 N∙m (4.34 lbf∙in to 6.46 lbf∙in)
A - Keypad
B - Mounting bracket A
4.
Put the mounting bracket that has the attached keypad in the control panel, and use the screws to attach it
from the outside.
Use the screws included with the installation support set to attach it. Tighten the screws to a correct
tightening torque:
• M4 screws: 0.98 N∙m to 1.33 N∙m (8.67 lbf∙in to 11.77 lbf∙in)
A - M4 screws
Figure 2.18 Mount Mounting Bracket to the Interior of the Control Panel
YASKAWA SIEPC71061705H GA700 Series Technical Manual
2.7 Install the Keypad in a Control Panel or Another Device
C - Holder
Figure 2.16 Remove the Keypad
C - M3 screws
D - Screw mounting holes
Figure 2.17 Attach Keypad to Mounting Bracket
B - Enclosure panel
2
47