Set Monitoring Items To Be Shown As A Trend Plot - YASKAWA GA700 Series Technical Manual

4.6 Keypad Operation
3.
Push or
4.
Push or
It will be displayed as follows.
◆

Set Monitoring Items to be Shown as a Trend Plot

You must set the items in this figure to display as a trend plot.
A - Monitor Parameter 1 (set with [Custom Monitor
1])
B - Monitor Parameter 2 (set with [Custom Monitor
2])
C - Trend Plot 2 Scale Maximum/Minimum Value
■
Select Monitor Items to Show as a Trend Plot
The procedure in this section shows how to show the frequency reference monitor as a trend plot.
1.
Push [Home] to show the HOME screen.
Note:
• The keypad will [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push [Menu].
156
to select [Monitors], then push
to select [Analog Gauge], then push
, push [Back] to show [Home] on
.
.
D - Trend Plot Time Scale
E - Trend Plot 1 Scale Maximum/Minimum Value
.
YASKAWA SIEPC71061705H GA700 Series Technical Manual