YASKAWA GA700 Series Technical Manual page 51

2.
Loosen the front cover screws.
3.
Push on the four tabs found on each side of the front cover, then pull the front cover forward to remove it
from the drive.
A - Pull forward to remove the front cover.
4.
Remove the front cover from the drive.
■
Reattach the Front Cover
Wire the drive and other peripheral devices then reattach the front cover.
Note:
Wire the grounding terminals first, main circuit terminals next, and control circuit terminals last.
1.
Move the front cover to connect the hooks at the top of the front cover to the drive.
A - Hooks
YASKAWA SIEPC71061705H GA700 Series Technical Manual
Figure 2.25 Loosen the Front Cover Screws
Figure 2.26 Pull Forward to Remove the Front Cover
Figure 2.27 Remove the Front Cover
Figure 2.28 Reattach the Front Cover
2.8 Removing/Reattaching Covers
B - Unhook the tabs found on the sides of the front
cover.
2
51