YASKAWA GA700 Series Technical Manual page 958

12.11 o: Keypad-Related Settings
No. Item
*2
5 Monitor Unit 1
6 Monitor number 2
7 Monitor Unit 2
: :
22 Monitor number 10
23 Monitor Unit 10
24 - 27 Reserved
28 Row number
*1 If there is no data log monitor selected, the text string of [0000] is generated.
*2 Refer to Table 12.82 for information about unit codes.
Unit Code (Hex.) Unit
00 –
01 Hz
02 RPM
03 %
04 VAC
05 VDC
06 A
07 sec
Third and Subsequent Rows: Log Data
This example shows the data text strings and data generated for the third row of log data.
Example of generated data:
02,0012,160107111239,1770,1770,00BE,0118,0028,0000,0000,0000,0000,0000,0000,0000,00000C
No. Item
1 Attribute
2 File number
3 Time stamp
4 Log Monitor Data 1
5 Log Monitor Data 2
: :
13 Log Monitor Data 10
14 Reserved
15 Encoding data
16 Row number
■
o5-01: Log Start/Stop Selection
No.
Name
(Hex.)
o5-01 Log Start/Stop Selection
(1551)
RUN
0 : OFF
958
Number of
Characters
4 Unit code and number of decimal places used for the monitor selected with o5-03
Example when U1-01 = 30.00 Hz:
Number of decimal places = 2, Hz unit code = 01, monitor unit 1 = 0201 (Hex.)
4 Monitor number (Dec.) set to o5-04 [Log Monitor Data10]
4 Unit code and number of decimal places used for the monitor selected with o5-04
: :
4 Monitor number (Dec.) set to o5-12 [Log Monitor Data10]
4 Unit code and number of decimal places used for the monitor selected with o5-12
4 -
6 Row number (Hex.) in the data log file
Table 12.82 Unit Codes
Unit Code (Hex.) Unit
08 PPR
09 kW
0A Ω
0B ms
0C kHz
0D PSI
0E MPM
0F FPM
Number of
Characters
2 [02] shows that the record is a monitor data record.
4 Generates the [xxx] part (a 3-digit decimal number) of the [GLOG0xxx.csv] filename of the log data in hexadecimal
format.
12 Data log data was retrieved (YYMMDDHHMMSS)
4 Log monitor data (Hex.) of the monitor selected with o5-03 [Log Monitor Data 1]
4 Log monitor data (Hex.) of the monitor selected with o5-04 [Log Monitor Data 2]
: :
4 Log monitor data (Hex.) of the monitor selected with o5-12 [Log Monitor Data 10]
4 -
4 Log Monitor Data 1 to 10 Code Data (Hex.)
Bits 0 to 9 show the encoding of log monitor data 1 to 10. A bit value of 1 shows that the data represents a negative
value. (Log monitor data 1 to 10 are absolute value data without encoding)
Example when log monitor data 2, 5, and 8 show negative values: Bits 1, 4, and 7 have values of 1, and the encoding
data = 0010010010 (Bin.) = 0092 (Hex.)
6 Row number (Hex.) in the data log file
V/f CL-V/f OLV CLV
Sets the data log function. This parameter is only available when using an LCD keypad.
Description
Unit Code (Hex.) Unit
10 H
11 V
12 us
13 min
14 °C
15 W
16 kWH
17 MWH
Description
Description
AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
YASKAWA SIEPC71061705H GA700 Series Technical Manual
Unit Code (Hex.) Unit
18 0H
19 –
1A –
1B –
1C –
1D –
1E –
1F –
Default
(Range)
0
(0 - 1)