2.10
Installation Methods
The drive installation methods include standard installation and external heatsink installation.
◆
Standard Installation
Refer to
Drive Exterior and Mounting Dimensions on page 446
and installation methods.
◆
External Heatsink
Refer to
Table
2.14,
Table
An attachment is necessary to install drive models smaller than 2082 (200 V class) and 4060 (400 V class) with
the heatsink outside of the panel.
Note:
• The exterior mounting dimensions and installation dimensions for a standard installation are different than the dimensions for an
external heatsink installation.
• The shaded parts of the panel cut-out dimensions are the gasket dimensions. Make sure that the gasket is not smaller than the specified
dimension.
Drive Model
2004 - 2042
4002 - 4023
2110 - 2415
4075 - 4675
YASKAWA SIEPC71061705H GA700 Series Technical Manual
2.15, and
Table 2.16
for the panel cut-out dimensions for external heatsink installations.
Table 2.13 External Heatsink Attachment
2056
4031, 4038
2070, 2082
4044, 4060
2.10 Installation Methods
for more information about external dimensions
Model
900-193-209-001
900-193-209-002
900-193-209-003
-
2
55