YASKAWA GA700 Series Technical Manual page 989

◼ Se t the Sampling Time
The procedure in this section shows how to set the sampling time for data logging.
1. Push (Home) to show the HOME screen.
Note: When the drive is in HOME Mode, the screen shows [Home] in the upper right-
hand corner of the screen.
 If the screen does not show [Home] for
to show [Home].
2. Push (Menu).
3. Push or
4. Push or
5. Push or
6. Push or
Note: The range of the sampling time that can be set depends on the type of data log.
7. When you complete changing the value, push
The procedure to set the sampling time is complete.
to select [Diagnostic Tools], then push
to select [Data Logger], then push
to select [Log Sampling Interval], then push
to select the digit, then push
, push (Back), and then push
.
(Setup).
.
or to change the value.
.
D ocu ment No. E ZZ024048<1>
P r epared in October, 2021
5 / 19