YASKAWA GA700 Series Technical Manual page 789

6 : 500 kbps
7 : 800 kbps
8 : 1 Mbps
■
F6-45: BACnet Node Address
No.
Name
(Hex.)
F6-45 BACnet Node Address
(02FB)
■
F6-46: BACnet Baud Rate
No.
Name
(Hex.)
F6-46 BACnet Baud Rate
(02FC)
0 : 1200 bps
1 : 2400 bps
2 : 4800 bps
3 : 9600 bps
4 : 19.2 kbps
5 : 38.4 kbps
6 : 57.6 kbps
7 : 76.8 kbps
8 : 115.2 kbps
■
F6-47: Rx to Tx Wait Time
No.
Name
(Hex.)
F6-47 Rx to Tx Wait Time
(02FD)
■
F6-48: BACnet Device Object Identifier0
No.
Name
(Hex.)
F6-48 BACnet Device Object
Identifier0
(02FE)
■
F6-49: BACnet Device Object Identifier1
No.
Name
(Hex.)
F6-49 BACnet Device Object
Identifier1
(02FF)
■
F6-50: DeviceNet MAC Address
No.
Name
(Hex.)
F6-50 DeviceNet MAC Address
(03C1)
Note:
Be sure to set a MAC address that is different than all other node addresses. Do not set this parameter to 0. Incorrect parameter settings
will cause AEr [Station Address Setting Error] errors and the MS LED on the option will flash.
YASKAWA SIEPC71061705H GA700 Series Technical Manual
V/f CL-V/f OLV CLV AOLV
Sets the node address for BACnet communication.
V/f CL-V/f OLV CLV AOLV
Sets the BACnet communications speed.
V/f CL-V/f OLV CLV AOLV
Sets the wait time for the drive to receive and send BACnet communication.
V/f CL-V/f OLV CLV AOLV
Sets the last word of BACnet communication addresses.
V/f CL-V/f OLV CLV AOLV
Sets the last word of BACnet communication addresses.
V/f CL-V/f OLV CLV AOLV
Sets the MAC address for DeviceNet communication. Restart the drive after you change the
parameter setting.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
12.7 F: Options
Default
(Range)
1
(0 - 127)
Default
(Range)
3
(0 - 8)
Default
(Range)
5 ms
(5 - 65 ms)
Default
(Range)
0
(0 - FFFF)
Default
(Range)
0
(0 - 3F)
Default
(Range)
0
(0 - 64)
12
789