YASKAWA GA700 Series Technical Manual page 161

3.
Push or
4.
Push or
5.
Push or
6.
Push or
7.
Push or
• Push [Default] to set the parameter to factory default.
• Push [Min/Max] to show the minimum value or the maximum value on the display.
8.
Push to keep the changes.
9.
Continue to change parameters, then push
after you change all the applicable parameters.
YASKAWA SIEPC71061705H GA700 Series Technical Manual
to select [Parameters], then push
to select [C Tuning], then push
to select [C1 Accel & Decel Time], then push
to select C1-01, then push
to select the specified digit, then push
.
.
.
.
or to select the correct number.
[Back], [Home] to go back to the home screen
4.6 Keypad Operation
161
4