YASKAWA GA700 Series Technical Manual page 400

8.4 Replace Cooling Fans and Circulation Fans
1.
Connect the relay connectors between the drive and cooling fans.
2.
Align the notches on the fans with the pins on the drive and install the cooling fans in the drive.
A - Notch on fan
B - Alignment pins on drive
3.
Put the cables and connectors in the recess of the drive.
A - Front of drive
Make sure that the cables and connectors are in the correct space.
*1
4.
Hold the fan finger guards at an angle and put the connector tabs on the fan finger guards into the holes
on the drive.
Note:
When you install the cooling fans, make sure that you do not pinch cables between the fan finger guards and the drive.
400
Figure 8.35 Connect the Relay Connectors
Figure 8.36 Install the Cooling Fans
Figure 8.37 Put the Cables and Connectors in the Drive Recess
C - Front of drive
B - Space for cables
*1
YASKAWA SIEPC71061705H GA700 Series Technical Manual