ABB ACS880 Firmware Manual page 611

No. Name / Range /
Selection
0000h...FFFFh
96.56 Approved checksum
1
00000000...FFFFFFFFh
96.57 Approved checksum
2
00000000...FFFFFFFFh
96.58 Approved checksum
3
00000000...FFFFFFFFh
96.59 Approved checksum
4
00000000...FFFFFFFFh
96.61 User data logger
status word
b0 Running
b1 Triggered
b2 Data available
b3 Configured
b4...15 Reserved
0000h...FFFFh
96.63 User data logger
trigger
Off
On
Other [bit]
96.64 User data logger
start
Off
On
Other [bit]
96.65 Factory data logger
time level
Description
Approved (reference) checksum 1.
Approved checksum 1.
Approved (reference) checksum 2.
Approved checksum 2.
Approved (reference) checksum 3.
Approved checksum 3.
Approved (reference) checksum 4.
Approved checksum 4.
Provides status information on the user data logger.
See section Warning/fault history and
analysis (page 650).
Note: This parameter is read-only.
1 = The user data logger is running. The bit is cleared
after the post-trigger time has passed.
1 = The user data logger has been triggered. The bit is
cleared when the logger is restarted.
1 = The user data logger contains data that can be read.
Note that the bit is not cleared because the data is
saved to the memory unit.
1 = The user data logger has been configured. Note that
the bit is not cleared because the configuration data
is saved to the memory unit.
Triggers, or selects a source that triggers, the user data
logger.
0.
1.
See Terms and abbreviations (page
Starts, or selects a source that starts, the user data
logger.
0.
1.
See Terms and abbreviations (page
Selects the sampling interval for the factory data
logger. See section Warning/fault history and
analysis (page 650).
Parameters 611
Def / Type
FbEq 16b / 32b
1 = 1
0 / uint32
1 = 1
0 / uint32
1 = 1
0 / uint32
1 = 1
0 / uint32
1 = 1
- / uint16
1 = 1
Off / uint32
0
1
169).
Off / uint32
0
1
169).
500us / uint16