ABB ACS880 Firmware Manual page 434

434 Parameters
No. Name / Range /
Selection
40.92 Setpoint data
storage
-327.68 ... 327.67
Description
Storage parameter for receiving a process setpoint
value eg. through the embedded fieldbus interface.
The value can be sent to the drive as Modbus I/O data.
Set the target selection parameter of that particular
data (58.101...58.124) to
Set 1 setpoint 1 source (or
select Setpoint data storage.
Storage parameter for process setpoint.
Setpoint data storage. In
40.17 Set 1 setpoint 2 source),
Def / Type
FbEq 16b / 32b
0.00 / real32
40.16
100 = 1 / 100 = 1