ABB ACS880 Firmware Manual page 413

No. Name / Range /
Selection
Zero
Motor speed used
Output frequency
Motor current
Motor torque
DC voltage
Power inu out
Speed ref ramp in
Speed ref ramp out
Speed ref used
Torq ref used
Freq ref used
Process PID out
Process PID fbk
Process PID act
Process PID dev
Other [value]
Ambient
temperature
36.7 AL2 signal scaling
0.00 ... 32767.00
36.8 Logger function
b0 AL1
b1 AL2
b2...15 Reserved
0000h...FFFFh
36.9 Reset loggers
Done
All
PVL
Description
None
1.1 Motor speed used (page
1.6 Output frequency (page
1.7 Motor current (page
1.10 Motor torque (page
1.11 DC voltage (page 175).
1.14 Output power (page
23.1 Speed ref ramp input (page
23.2 Speed ref ramp output (page
24.1 Used speed reference (page
26.2 Torque reference used (page
28.2 Frequency ref ramp output (page
40.1 Process PID output actual (page
40.2 Process PID feedback actual (page
40.3 Process PID setpoint actual (page
40.4 Process PID deviation actual (page
See Terms and abbreviations (page
1.70 Ambient temperature % (page
The amplitude range of 0...100% corresponds to
0...60 °C or 32...140 °F.
Defines the signal value that corresponds to 100%
amplitude.
Signal value corresponding to 100%.
Determines whether amplitude loggers 1 and 2 are
active continuously or only when the drive is
modulating.
0 = Amplitude logger 1 active continuously
1 = Amplitude logger 1 active only when the drive is
modulating
0 = Amplitude logger 2 active continuously
1 = Amplitude logger 2 active only when the drive is
modulating
Resets the peak value logger and/or amplitude logger
2.
(Amplitude logger 1 cannot be reset.)
Reset completed or not requested (normal operation).
Reset both the peak value logger and amplitude logger
2.
Reset the peak value logger.
174).
174).
174).
174).
175).
311).
311).
318).
338).
347).
420).
420).
420).
420).
169).
177).
Parameters 413
Def / Type
FbEq 16b / 32b
0
1
3
4
6
7
8
10
11
12
13
14
16
17
18
19
20
100.00 / real32
1 = 1 / 100 = 1
- / uint16
1 = 1
Done / uint16
0
1
2