ABB ACS880 Firmware Manual page 470

470 Parameters
No. Name / Range /
Selection
50.41 FBA B act2
transparent source
Not selected
Other [value]
50.42 FBA B debug mode
Disable
Fast
50.43 FBA B control word
00000000...FFFFFFFFh
50.44 FBA B reference 1
50.45 FBA B reference 2
50.46 FBA B status word
00000000...FFFFFFFFh
50.47 FBA B actual value 1
50.48 FBA B actual value 2
Description
When parameter 50.38 FBA B actual 2 type
Transparent or General, this parameter selects the
source of actual value 2 transmitted to the fieldbus
network through fieldbus adapter B.
No source selected.
See Terms and abbreviations (page
Enables the display of raw (unmodified) data received
from and sent to fieldbus adapter B in parameters
50.43...50.48.
This functionality should only be used for debugging.
Note: This parameter cannot be changed while the
drive is running.
Display of raw data from fieldbus adapter B disabled.
Display of raw data from fieldbus adapter B enabled.
Displays the raw (unmodified) control word sent by the
master (PLC) to fieldbus adapter B if debugging is
enabled by parameter
This parameter is read-only.
Control word sent by master to fieldbus adapter B.
Displays raw (unmodified) reference REF1 sent by the
master (PLC) to fieldbus adapter B if debugging is
enabled by parameter
This parameter is read-only.
Displays raw (unmodified) reference REF2 sent by the
master (PLC) to fieldbus adapter B if debugging is
enabled by parameter
This parameter is read-only.
Displays the raw (unmodified) status word sent by
fieldbus adapter B to the master (PLC) if debugging is
enabled by parameter
This parameter is read-only.
Status word sent by fieldbus adapter B to master.
Displays raw (unmodified) actual value ACT1 sent by
fieldbus adapter B to the master (PLC) if debugging is
enabled by parameter
This parameter is read-only.
Displays raw (unmodified) actual value ACT2 sent by
fieldbus adapter B to the master (PLC) if debugging is
enabled by parameter
This parameter is read-only.
is set to
169).
50.42 FBA B debug mode.
50.42 FBA B debug mode.
50.42 FBA B debug mode.
50.42 FBA B debug mode.
50.42 FBA B debug mode.
50.42 FBA B debug mode.
Def / Type
FbEq 16b / 32b
Not selected / uint32
0
Disable / uint16
0
1
0 / uint32
1 = 1
- / int32
- / int32
0 / uint32
1 = 1
- / int32
- / int32