ABB ACS880 Firmware Manual page 175

No. Name / Range /
Selection
1.11 DC voltage
0.00 ... 2000.00 V
1.13 Output voltage
0...2000 V
1.14 Output power
-32768.00 ...
32767.00 kW
1.15 Output power % of
motor nom
-300.00 ... 300.00 %
1.17 Motor shaft power
-32768.00 ...
32767.00 kW or hp
1.18 Inverter GWh
motoring
0...32767 GWh
1.19 Inverter MWh
motoring
0...1000 MWh
1.20 Inverter kWh
motoring
0...1000 kWh
1.21 U-phase current
-30000.00 ...
30000.00 A
1.22 V-phase current
-30000.00 ...
30000.00 A
1.23 W-phase current
-30000.00 ...
30000.00 A
1.24 Flux actual %
0...200 %
Description
Measured DC link voltage.
DC link voltage.
Calculated motor voltage in V AC.
Motor voltage.
Drive output power. The unit is selected by parameter
96.16 Unit selection. A filter time constant for this signal
can be defined by parameter
out.
Output power. For scaling, see parameter 46.4.
Shows the value of 1.14 Output power
nominal power of the motor.
Output power.
Estimated mechanical power at motor shaft. The unit
is selected by parameter
time constant for this signal can be defined by
parameter 46.14 Filter time power
Motor shaft power.
Amount of energy that has passed through the drive
(towards the motor) in full gigawatt-hours. The
minimum value is zero.
Motoring energy in GWh.
Amount of energy that has passed through the drive
(towards the motor) in full megawatt-hours. Whenever
the counter rolls over,
incremented. The minimum value is zero.
Motoring energy in MWh.
Amount of energy that has passed through the drive
(towards the motor) in full kilowatt-hours. Whenever
the counter rolls over,
incremented. The minimum value is zero.
Motoring energy in kWh.
Measured U-phase current.
U-phase current. For scaling, see parameter 46.5.
Measured V-phase current.
V-phase current. For scaling, see parameter 46.5.
Measured W-phase current.
W-phase current. For scaling, see parameter 46.5.
Used flux reference in percent of nominal flux of motor.
Flux reference.
46.14 Filter time power
in percent of the
96.16 Unit selection. A filter
out.
1.18 Inverter GWh motoring
1.19 Inverter MWh motoring
Parameters 175
Def / Type
FbEq 16b / 32b
- / real32
10 = 1 V / 100 = 1 V
- / real32
1 = 1 V / 1 = 1 V
- / real32
- / -
- / real32
10 = 1 % / 100 = 1 %
- / real32
1 = 1 kW or hp / 100 =
1 kW or hp
- / int16
1 = 1 GWh / 1 = 1 GWh
- / int16
is
1 = 1 MWh / 1 = 1 MWh
- / real32
is
10 = 1 kWh / 1 = 1 kWh
- / real32
- / -
- / real32
- / -
- / real32
- / -
- / real32
1 = 1 % / 1 = 1 %