ABB ACS880 Firmware Manual page 567

No. Name / Range /
Selection
0...16777215
90.13 Encoder 1 revolution
extension
-2147483648...2147483647
90.14 Encoder 1 position
raw
0...16777215
90.15 Encoder 1
revolutions raw
0...16777215
90.20 Encoder 2 speed
-32768.00 ...
32767.00 rpm
90.21 Encoder 2 position
0.00000000 ...
1.00000000 rev
90.22 Encoder 2 multiturn
revolutions
0...16777215
Description
Encoder 1 revolutions.
Displays the revolution count extension for encoder 1.
With a single-turn encoder, the counter is incremented
when encoder position (parameter 90.11) wraps around
in the positive direction, and decremented in the
negative direction.
With a multiturn encoder, the counter is incremented
when the revolutions count (parameter 90.12) exceeds
the value range in the positive direction, and
decremented in the negative direction.
Note: This parameter is read-only.
Encoder 1 revolution count extension.
Displays the raw measurement data of encoder 1
position (within one revolution) as a 24-bit unsigned
integer received from the encoder interface.
Note: This parameter is read-only.
Raw encoder 1 position within one revolution.
Displays the revolutions of (multiturn) encoder 1 within
its value range (see parameter
width) as a raw measurement.
Note: This parameter is read-only.
Raw encoder 1 revolution count.
Displays encoder 2 speed in rpm.
Note: This parameter is read-only.
Encoder 2 speed.
For scaling, see parameter 46.1.
Displays the actual position of encoder 2 within one
revolution.
Note: This parameter is read-only.
Encoder 2 position within one revolution.
Displays the revolutions of (multiturn) encoder 2 within
its value range (see parameter
width).
Note: This parameter is read-only.
Encoder 2 revolutions.
92.14 Revolution data
93.14 Revolution data
Parameters 567
Def / Type
FbEq 16b / 32b
- / -
- / int32
- / -
- / uint32
- / -
- / uint32
- / -
- / real32
- / -
- / real32
- / -
- / uint32
- / -