ABB ACS880 Firmware Manual page 524

524 Parameters
No. Name / Range /
Selection
b0 Restart delay
Enabled
b1 Restart delay Active
b2 Restart delay Done
b3 Speed obs. Enabled
b4 Speed obs.
Initializing
b5 Speed obs.
Measuring
b6 Speed obs. In-range
b7 Speed obs. Speed
check delay
b8 Speed obs. OK to
restart
b9 Speed obs. Sleeping
b10 Flying start speed
check Enabled
b11 Flying start speed
check Done
b12 Flying start speed
check OK
b13 Time control
Enabled
b14 Time control
OFF-state
b15 Time control
ON-state
0000h...FFFFh
Description
Restart delay function is enabled.
Restart delay function is active now.
Restart delay function has been completed.
Backspin speed observer function is enabled.
Backspin speed observer function is initializing.
Backspin speed observer function is now measuring
the actual speed.
Backspin observer measured speed is now is the user
defined safe-speed range.
Backspin observer speed check delay timer is on.
Backspin speed observer routine is over.
Motor speed is at safespeed range.
Backspin speed observer function routine will be
reinitialized on the next start command.
Flying start speed check is enabled.
Flying start speed check is completed.
Flying start speed check requested bypassing of the
starting routines.
Time control function is enabled
Time control function is in OFF state.
Time control is in ON state.
Def / Type
FbEq 16b / 32b
1 = 1