ABB ACS880 Firmware Manual page 449

No. Name / Range /
Selection
45.14 Tariff selection
Energy tariff 1
Energy tariff 2
DI1
DI2
DI3
DI4
DI5
DI6
DIO1
DIO2
Other [bit]
45.17 Tariff currency unit
EUR
USD
Local currency
45.18 CO2 conversion
factor
0.000 ... 65.535
tn_MWh
45.19 Comparison power
0.0 ... 100000.0 kW
45.21 Energy calculations
reset
Done
Description
Selects (or defines a source that selects) which
pre-defined energy tariff is used.
0 = 45.12 Energy tariff 1
1 = 45.13 Energy tariff 2
0.
1.
Digital input DI1 (10.2 DI delayed
Digital input DI2 (10.2 DI delayed
Digital input DI3 (10.2 DI delayed
Digital input DI4 (10.2 DI delayed
Digital input DI5 (10.2 DI delayed
Digital input DI6 (10.2 DI delayed
Digital input/output DIO1
0).
Digital input/output DIO2
1).
See Terms and abbreviations (page
Specifies the currency used for the savings calculations.
Euro.
Dollar.
Local currency. The name of the currency can be edited
by choosing Menu - Settings - Edit texts on the control
panel.
Defines a factor for conversion of saved energy into
CO2 emissions (kg/kWh or tn/MWh).
Factor for conversion of saved energy into CO
emissions.
Actual power that the motor absorbs when connected
direct on-line and operating the application. The value
is used for reference when energy savings are
calculated.
Note: The accuracy of the energy savings calculation
is directly dependent on the accuracy of this value. If
nothing is entered here, then the nominal motor power
is used by the calculation, but that may inflate the
energy savings reported as many motors do not absorb
nameplate power.
Motor power. For scaling, see parameter 46.4.
Resets the savings counter parameters
Reset not requested (normal operation), or reset
complete.
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(11.2 DIO delayed status, bit
(11.2 DIO delayed status, bit
169).
2
45.1...45.9
Parameters 449
Def / Type
FbEq 16b / 32b
Energy tariff 1 /
uint32
0
1
2
3
4
5
6
7
10
11
EUR / uint16
101
102
100
0.500 tn_MWh /
uint16
1 = 1 tn_MWh / 100 =
1 tn_MWh
0.0 kW / real32
- / -
Done / uint16
0