ABB ACS880 Firmware Manual page 28

28 Quick start-up guide
Set the correct date:
• Use
and
right.
• Use
and
• Press (Save) to accept the new setting.
Check/adjust all the remaining settings in
the Date & time menu.
The Show clock setting determines whether
the time is shown at all times in the bottom
pane of the display.
After you have made the settings, press
(Back or Exit) repeatedly until the Home view
(right) reappears.
Switch to local control to ensure that external
control is disabled by pressing the
Local control is indicated by the text "Local"
in the top pane.
Note: The ESP control program is active only
in Remote control mode.
Open the main Menu by pressing
Highlight Parameters and press
1 – Power-up, date and time settings
to move the cursor left and
to change the value.
2 – Supply voltage and motor data settings
key.
Loc/Rem
(Menu).
(Select).