ABB ACS880 Firmware Manual page 531

No. Name / Range /
Selection
b0 Starting speed
enabled
b1 Starting speed
active
b2 Starting speed done
b3 Kick start enabled
b4 Kick start active
b5 Kick start done
b6 Current pulse start
enabled
b7 Current pulse start
active
b8 Current pulse start
done
b9 Acceleration
assistance enabled
b10 Acceleration
assistance active
b11 Acceleration
assistance done
b12...14 Reserved
b15 Current boost cmd
0000h...FFFFh
Description
Starting speed setting is not zero.
Starting speed routine is performed.
Starting speed routine has been completed.
Kick-start routine is enabled.
Kick-start routine is active.
Kick-start routine has been comleted.
Current pulse start routine is enabled.
Current pulse start routine is active.
Current pulse start routine has been completed.
Acceleration assistance routine is enabled.
Acceleration assistance routine is active.
Acceleration assistance routine has been completed.
Current boost cmd is active.
Parameters 531
Def / Type
FbEq 16b / 32b
1 = 1