ABB ACS880 Firmware Manual page 512

512 Parameters
No. Name / Range /
Selection
62.26 M/F data 2 value
0...65535
62.27 M/F data 3 value
0...65535
62.28 Follower node 2 data
1 value
0...65535
62.29 Follower node 2 data
2 value
0...65535
62.30 Follower node 2 data
3 value
0...65535
62.31 Follower node 3 data
1 value
Description
(Follower only) Displays, in integer format, the data
received from the master as word 2.
Parameter 62.2 M/F data 2 selection
select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Data received as word 2 in master/follower
communication.
(Follower only) Displays, in integer format, the data
received from the master as word 3.
Parameter 62.3 M/F data 3 selection
select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Data received as word 3 in master/follower
communication.
Displays, in integer format, the data received from the
first follower (ie. follower with node address 2) as word
1.
Parameter 62.4 Follower node 2 data 1 sel
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Data received as word 1 from follower with node
address 2.
Displays, in integer format, the data received from the
first follower (ie. follower with node address 2) as word
2.
Parameter 62.5 Follower node 2 data 2 sel
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Data received as word 2 from follower with node
address 2.
Displays, in integer format, the data received from the
first follower (ie. follower with node address 2) as word
3.
Parameter 62.6 Follower node 2 data 3 sel
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Data received as word 3 from follower with node
address 2.
Displays, in integer format, the data received from the
second follower (ie. follower with node address 3) as
word 1.
Parameter 62.7 Follower node 3 data 1 sel
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Def / Type
FbEq 16b / 32b
- / uint16
can be used to
- / -
- / uint16
can be used to
- / -
- / uint16
can be used
- / -
- / uint16
can be used
- / -
- / uint16
can be used
- / -
- / uint16
can be used