ABB ACS880 Firmware Manual page 235

No. Name / Range /
Selection
13.29 AO2 out at AO2 src
min
0.000 ... 22.000 mA
13.30 AO2 out at AO2 src
max
0.000 ... 22.000 mA
13.91 AO1 data storage
-327.68 ... 327.67
13.92 AO2 data storage
-327.68 ... 327.67
Description
Defines the minimum output value for analog output
AO2.
See also drawing at parameter
Minimum AO2 output value.
Defines the maximum output value for analog output
AO2.
See also drawing at parameter
Maximum AO2 output value.
Storage parameter for controlling analog output AO1
eg. through fieldbus.
In 13.12 AO1 source, select
this parameter as the target of the incoming value data.
With the embedded fieldbus interface, simply set the
target selection parameter of that particular data
(58.101...58.124) to AO1 data
Storage parameter for AO1.
Storage parameter for controlling analog output AO2
eg. through fieldbus.
In 13.22 AO2 source, select
this parameter as the target of the incoming value data.
With the embedded fieldbus interface, simply set the
target selection parameter of that particular data
(58.101...58.124) to AO2 data
Storage parameter for AO2.
13.27 AO2 source min.
13.27 AO2 source min.
AO1 data storage. Then set
storage.
AO2 data storage. Then set
storage.
Parameters 235
Def / Type
FbEq 16b / 32b
0.000 mA / real32
1000 = 1 mA / 1000 =
1 mA
20.000 mA / real32
1000 = 1 mA / 1000 =
1 mA
0.00 / real32
100 = 1 / 100 = 1
0.00 / real32
100 = 1 / 100 = 1