ABB ACS880 Firmware Manual page 359

No. Name / Range /
Selection
30.11 Minimum speed
-30000.00 ...
30000.00 rpm
30.12 Maximum speed
-30000.00 ...
30000.00 rpm
Description
Defines the minimum allowed speed.
WARNING!
This value must not be higher than
Maximum speed.
WARNING!
In frequency control mode, this limit is not
effective. Make sure the frequency limits
and 30.14) are set appropriately if frequency
control is used.
WARNING!
In a master/follower configuration, do not set
maximum and minimum speed limits with the
same sign on a follower drive. See section
Master/follower functionality (page
Minimum allowed speed. For scaling, see parameter
46.1.
Defines the maximum allowed speed.
WARNING!
This value must not be lower than
Minimum speed.
WARNING!
In frequency control mode, this limit is not
effective. Make sure the frequency limits
and 30.14)) are set appropriately if frequency
control is used.
WARNING!
In a master/follower configuration, do not set
maximum and minimum speed limits with the
same sign on a follower drive. See section
Master/follower functionality (page
Maximum speed. For scaling, see parameter 46.1.
Parameters 359
Def / Type
FbEq 16b / 32b
-1500.00; -1800.00
(95.20 b0) rpm /
real32
30.12
(30.13
72).
- / -
1500.00; 1800.00
(95.20 b0) rpm /
real32
30.11
(30.13
72).
- / -