ABB ACS880 Firmware Manual page 492

492 Parameters
No. Name / Range /
Selection
Speed
Frequency
60.11 M/F ref2 type
60.12 M/F act1 type
Auto
Torque
Speed
Frequency
60.13 M/F act2 type
Auto
Torque
Speed
Frequency
60.14 M/F follower
selection
Follower node 2
Follower node 3
Follower node 4
Follower nodes 2+3
Follower nodes 2+4
Description
The scaling is defined by parameter
The scaling is defined by parameter
scaling.
Selects the type and scaling of reference 2 received
from the master/follower link. The resulting value is
shown by 3.14 M/F or D2D
For the selections, see parameter
Selects the type/source and scaling of actual value
ACT1 transmitted to the master/follower link.
Type/source and scaling follow the type of reference
1 selected by parameter
individual settings below for the sources and scalings.
Reserved
Reserved
1.10 Motor torque is sent as actual value 1. The scaling
is defined by parameter
1.1 Motor speed used is sent as actual value 1. The
scaling is defined by parameter
1.6 Output frequency is sent as actual value 1. The
scaling is defined by parameter
Selects the type/source and scaling of actual value
ACT2 transmitted to the master/follower link.
Type/source and scaling follow the type of reference
2 selected by parameter
individual settings below for the sources and scalings.
Reserved
Reserved
1.10 Motor torque is sent as actual value 2. The scaling
is defined by parameter
1.1 Motor speed used is sent as actual value 2. The
scaling is defined by parameter
1.6 Output frequency is sent as actual value 2. The
scaling is defined by parameter
(Effective in the master only.) Defines the followers
from which data is read. See also parameters
62.28...62.33.
Data is read from the follower with node address 2.
Data is read from the follower with node address 3.
Data is read from the follower with node address 4.
Data is read from the followers with node addresses 2
and 3.
Data is read from the followers with node addresses 2
and 4.
46.1 Speed scaling.
46.2 Frequency
ref2.
60.10 M/F ref1
60.10 M/F ref1 type. See the
46.3 Torque scaling.
46.1 Speed scaling.
46.2 Frequency scaling.
60.11 M/F ref2 type. See the
46.3 Torque scaling.
46.1 Speed scaling.
46.2 Frequency scaling.
Def / Type
FbEq 16b / 32b
4
5
Torque / uint16
type.
Auto / uint16
0
1
2
3
4
5
Auto / uint16
0
1
2
3
4
5
None / uint32
2
4
8
6
10