ABB ACS880 Firmware Manual page 516

516 Parameters
No. Name / Range /
Selection
b11 Follower 28
b12 Follower 29
b13 Follower 30
b14 Follower 31
b15 Follower 32
0000h...FFFFh
62.45 Data set 1 data 1
selection
None
CW 16bit
Ref1 16bit
Ref2 16bit
Other [value]
62.46 Data set 1 data 2
selection
62.47 Data set 1 data 3
selection
... ...
62.50 Data set 3 data 3
selection
62.51 Data set 10 data 1
selection
None
CW 16bit
Ref1 16bit
Description
1 = Follower 28 ready.
1 = Follower 29 ready.
1 = Follower 30 ready.
1 = Follower 31 ready.
1 = Follower 32 ready.
Parameters 62.45...62.50
received in data sets 1 and 3 from the external
controller. These data sets are used in ModuleBus
communication with a "standard drive"
controller drive type =
Parameters 62.95...62.100
from the external controller in integer format, and can
be used as sources by other parameters.
For example, this parameter selects a target for word
1 of data set 1. Parameter
displays the received data in integer format, and can
also be used as a source by other parameters.
None.
Control Word (16 bits)
Reference REF1 (16 bits)
Reference REF2 (16 bits)
See Terms and abbreviations (page
Defines a target for the data received as word 2 of data
set 1.
See also parameter 62.96 Data set 1 data 2
For the selections, see parameter
1 selection.
See parameter 62.45 Data set 1 data 1
...
See parameter 62.45 Data set 1 data 1
Parameters 62.51...62.74
received in data sets 10, 12, 14, 16, 18, 20, 22 and 24 from
the external controller.
Parameters 62.101...62.124
from the external controller in integer format, and can
be used as sources by other parameters.
For example, this parameter selects a target for word
1 of data set 10. Parameter
value displays the received data in integer format, and
can also be used as a source by other parameters.
None.
Control Word (16 bits)
Reference REF1 (16 bits)
define a target for the data
(60.50 DDCS
ABB standard drive).
display the data received
62.95 Data set 1 data 1 value
169).
value.
62.45 Data set 1 data
selection.
selection.
define a target for the data
display the data received
62.101 Data set 10 data 1
Def / Type
FbEq 16b / 32b
1 = 1
None / uint32
0
1
2
3
None / uint32
None / uint32
...
None / uint32
None / uint32
0
1
2