ABB ACS880 Firmware Manual page 430

430 Parameters
No. Name / Range /
Selection
DI1
DI2
DI3
DI4
DI5
DI6
DIO1
DIO2
Other [bit]
40.43 Set 1 sleep level
0.0 ... 32767.0
40.44 Set 1 sleep delay
0.0 ... 3600.0 s
40.45 Set 1 sleep boost
time
0.0 ... 3600.0 s
40.46 Set 1 sleep boost
step
0.0 ... 32767.0
40.47 Set 1 wake-up
deviation
-32768.00 ...
32767.00 rpm, % or
Hz
40.48 Set 1 wake-up delay
Description
Digital input DI1 (10.2 DI delayed
Digital input DI2 (10.2 DI delayed
Digital input DI3 (10.2 DI delayed
Digital input DI4 (10.2 DI delayed
Digital input DI5 (10.2 DI delayed
Digital input DI6 (10.2 DI delayed
Digital input/output DIO1
0).
Digital input/output DIO2
1).
See Terms and abbreviations (page
Defines the start limit for the sleep function when
parameter 40.41 Set 1 sleep mode
Sleep start level.
Defines a delay before the sleep function actually
becomes enabled, to prevent nuisance sleeping.
The delay timer starts when the sleep condition
selected by parameter
true, and resets if the condition becomes false.
Sleep start delay.
Defines a boost time for the sleep boost step. See
parameter 40.46 Set 1 sleep boost
Sleep boost time.
When the drive is entering sleep mode, the process
setpoint is increased by this value for the time defined
by parameter 40.45 Set 1 sleep boost
If active, sleep boost is aborted when the drive wakes
up.
Sleep boost step.
When 40.41 Set 1 sleep mode
parameter defines the wake-up level as deviation
between process setpoint and feedback. The unit is
selected by parameter
When the deviation exceeds the value of this parameter,
and remains there for the duration of the wake-up delay
(40.48 Set 1 wake-up delay), the drive wakes up.
See also parameter 40.31 Set 1 deviation
Wake-up level (as deviation between process setpoint
and feedback).
Defines a wake-up delay for the sleep function to
prevent nuisance wake-ups. See parameter
1 wake-up deviation.
The delay timer starts when the deviation exceeds the
wakeup level (40.47 Set 1 wake-up
if the deviation falls below the wake-up level.
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(11.2 DIO delayed status, bit
(11.2 DIO delayed status, bit
169).
is set to Internal.
40.41 Set 1 sleep mode
step.
time.
is set to Internal, this
40.12 Set 1 unit selection.
inversion.
40.47 Set
deviation), and resets
Def / Type
FbEq 16b / 32b
2
3
4
5
6
7
10
11
0.0 / real32
1 = 1 / 10 = 1
60.0 s / real32
becomes
1 = 1 s / 10 = 1 s
0.0 s / real32
1 = 1 s / 10 = 1 s
0.0 / real32
1 = 1 / 10 = 1
- / real32
1 = 1 rpm, % or Hz /
100 = 1 rpm, % or Hz
0.50 s / real32