ABB ACS880 Firmware Manual page 511

No. Name / Range /
Selection
62.6 Follower node 2 data
3 sel
62.7 Follower node 3 data
1 sel
62.8 Follower node 3 data
2 sel
62.9 Follower node 3 data
3 sel
62.10 Follower node 4
data 1 sel
62.11 Follower node 4
data 2 sel
62.12 Follower node 4
data 3 sel
62.25 M/F data 1 value
0...65535
Description
Defines a target for the data received as word 3 from
the first follower (ie. the follower with node address 2)
through the master/follower link.
See also parameter 62.30 Follower node 2 data 3
For the selections, see parameter
2 data 1 sel.
Defines a target for the data received as word 1 from
the second follower (ie. the follower with node address
3) through the master/follower link.
See also parameter 62.31 Follower node 3 data 1
For the selections, see parameter
2 data 1 sel.
Defines a target for the data received as word 2 from
the second follower (ie. the follower with node address
3) through the master/follower link.
See also parameter 62.32 Follower node 3 data 2
For the selections, see parameter
2 data 1 sel.
Defines a target for the data received as word 3 from
the second follower (ie. the follower with node address
3) through the master/follower link.
See also parameter 62.33 Follower node 3 data 3
For the selections, see parameter
2 data 1 sel.
Defines a target for the data received as word 1 from
the third follower (ie. the follower with node address
4) through the master/follower link.
See also parameter 62.34 Follower node 4 data 1
For the selections, see parameter
2 data 1 sel.
Defines a target for the data received as word 2 from
the third follower (ie. the follower with node address
4) through the master/follower link.
See also parameter 62.35 Follower node 4 data 2
For the selections, see parameter
2 data 1 sel.
Defines a target for the data received as word 3 from
the third follower (ie. the follower with node address
4) through the master/follower link.
See also parameter 62.36 Follower node 4 data 3
For the selections, see parameter
2 data 1 sel.
(Follower only) Displays, in integer format, the data
received from the master as word 1.
Parameter 62.1 M/F data 1 selection
select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Data received as word 1 in master/follower
communication.
Parameters 511
Def / Type
FbEq 16b / 32b
None / uint32
value.
62.4 Follower node
Follower SW / uint32
value.
62.4 Follower node
None / uint32
value.
62.4 Follower node
None / uint32
value.
62.4 Follower node
Follower SW / uint32
value.
62.4 Follower node
None / uint32
value.
62.4 Follower node
None / uint32
value.
62.4 Follower node
- / uint16
can be used to
- / -