ABB ACS880 Firmware Manual page 34

34 Quick start-up guide
3 – Control signal settings
13.12 AO1 source
13.17 AO1 source min
13.18 AO1 source max
13.19 AO1 out at AI1 src min
13.20 AO1 out at AI1 src max
Parameter 13.12 selects the source for analog output AO1 (by default, motor speed in
rpm).
Parameters 13.17 and 13.18 set low and high source signal values that correspond to
the actual analog output values defined by parameters 13.19 and 13.20.
Source signal
13.18
13.19
13.20
AO (mA)
13.17