ABB ACS880 Firmware Manual page 331

No. Name / Range /
Selection
DI4
DI5
DI6
DIO1
DIO2
Other [bit]
25.10 Speed ctrl balancing
ref
-300.0 ... 300.0 %
25.11 Speed control min
torque
-1600.0 ... 0.0 %
25.12 Speed control max
torque
0.0 ... 1600.0 %
25.13 Min torq sp ctrl em
stop
-1600.0 ... 0.0 %
25.14 Max torq sp ctrl em
stop
0.0 ... 1600.0 %
25.15 Proportional gain
em stop
1.00 ... 250.00
Description
Digital input DI4 (10.2 DI delayed
Digital input DI5 (10.2 DI delayed
Digital input DI6 (10.2 DI delayed
Digital input/output DIO1
0).
Digital input/output DIO2
1).
See Terms and abbreviations (page
Defines the reference used in speed controller output
balancing. The output of the speed controller is forced
to this value when balancing is enabled by parameter
25.9 Speed ctrl balancing
Speed control output balancing reference. For scaling,
see parameter 46.3.
Defines the minimum speed controller output torque.
Minimum speed controller output torque. For scaling,
see parameter 46.3.
Defines the maximum speed controller output torque.
Maximum speed controller output torque. For scaling,
see parameter 46.3.
Defines the minimum speed controller output torque
during a ramped emergency stop (Off1 or Off3).
Minimum speed controller output torque for ramped
emergency stop. For scaling, see parameter 46.3.
Defines the maximum speed controller output torque
during a ramped emergency stop (Off1 or Off3).
Maximum speed controller output torque for ramped
emergency stop. For scaling, see parameter 46.3.
Defines the proportional gain for the speed controller
when an emergency stop is active. See parameter
Speed proportional gain.
Proportional gain upon an emergency stop.
status, bit 3).
status, bit 4).
status, bit 5).
(11.2 DIO delayed status, bit
(11.2 DIO delayed status, bit
169).
enable.
Parameters 331
Def / Type
FbEq 16b / 32b
5
6
7
10
11
0.0 % / real32
- / -
-300.0 % / real32
- / -
300.0 % / real32
- / -
-400.0 % / real32
- / -
400.0 % / real32
- / -
10.00; 5.00 (95.21
25.2 b1/b2) / real32
- / -