ABB ACS880 Firmware Manual page 392

392 Parameters
No. Name / Range /
Selection
b2 Count rising edges
b3 Count falling edges
b4...15 Reserved
0000h...FFFFh
33.33 Edge counter 1
source
False
True
RO1
Other [bit]
33.34 Edge counter 1
divider
1...2147483647
33.35 Edge counter 1 warn
message
Edge counter 1
exceeded
Counted main
contactor
Counted output
relay
Counted motor
starts
Counted power ups
Counted DC charges
33.40 Edge counter 2
actual
0...4294967295
Description
Count rising edges
0 = Disable: Rising edges are not counted
1 = Enable: Rising edges are counted
Count falling edges
0 = Disable: Falling edges are not counted
1 = Enable: Falling edges are counted
Selects the signal to be monitored by signal edge
counter 1.
Constant 0.
Constant 1.
Bit 0 of 10.21 RO status (page
See Terms and abbreviations (page
Defines a divisor for signal edge counter 1. Determines
how many signal edges increment the counter by 1.
Divisor for signal edge counter 1.
Selects the optional warning message for signal edge
counter 1.
A888 Edge counter 1. The message text can be edited
on the control panel by choosing Menu – Settings – Edit
texts.
A884 Main contactor.
A881 Output relay.
A882 Motor starts.
A883 Power ups.
A885 DC charge.
Displays the actual present value of signal edge counter
2.
The counter is incremented every time the signal
selected by parameter
switches on or off (or either, depending on the setting
of 33.42 Edge counter 2
applied to the count (see
When the counter exceeds the limit set by
counter 2 warn limit, bit 3 of
to 1. The warning specified by
warn message is also given if enabled by
counter 2 function.
The counter can be reset from the Drive Composer PC
tool, or from the control panel by keeping Reset
depressed for over 3 seconds.
Actual present value of signal edge counter 2.
214).
169).
33.43 Edge counter 2 source
function). A divisor may be
33.44 Edge counter 2
33.41 Edge
33.1 Counter status
33.45 Edge counter 2
33.42 Edge
Def / Type
FbEq 16b / 32b
1 = 1
False / uint32
0
1
2
1 / uint32
- / -
Edge counter 1
exceeded / uint32
2
11
12
13
14
15
- / uint32
divider).
is set
- / -