ABB ACS880 Firmware Manual page 494

494 Parameters
No. Name / Range /
Selection
MSW bit 1
MSW bits 0 + 1
Always
MSW bit 12
MSW bits 0 + 12
MSW bits 1 + 12
60.19 M/F comm
supervision sel 1
b0 Follower 1
b1 Follower 2
b2 Follower 3
b3 Follower 4
b4 Follower 5
b5 Follower 6
b6 Follower 7
b7 Follower 8
b8 Follower 9
b9 Follower 10
b10 Follower 11
b11 Follower 12
b12 Follower 13
b13 Follower 14
Description
The master can only be started if all followers are ready
to operate (bit 1 of 6.11 Main status word
follower is on).
The master can only be started if all followers are ready
to switch on and ready to operate (bits 0 and 1 of
Main status word in each follower are on).
The starting of the master is not interlocked to the
status of the followers.
The master can only be started if user-definable bit 12
of 6.11 Main status word
parameter 6.31 MSW bit 12
The master can only be started if both bit 0 and bit 12
of 6.11 Main status word
The master can only be started if both bit 1 and bit 12
of 6.11 Main status word
Parameters 60.19...60.28
drive is the master on a D2D (drive-to-drive) link,
implemented by application programming. See
parameters 60.1 M/F communication port
M/F mode, and Drive (IEC 61131-3) application
programming manual (3AUA0000127808 [English]).
In the master, parameters
sel 1 and 60.20 M/F comm supervision sel 2
followers that are monitored for loss of communication.
This parameter selects which followers (out of followers
1...16) are monitored. Each of the selected followers is
polled by the master. If no reply is received, the action
specified in 60.9 M/F comm loss function
The status of communication is shown by
communication status 1
status 2.
1 = Follower 1 is polled by the master.
1 = Follower 2 is polled by the master.
1 = Follower 3 is polled by the master.
1 = Follower 4 is polled by the master.
1 = Follower 5 is polled by the master.
1 = Follower 6 is polled by the master.
1 = Follower 7 is polled by the master.
1 = Follower 8 is polled by the master.
1 = Follower 9 is polled by the master.
1 = Follower 10 is polled by the master.
1 = Follower 11 is polled by the master.
1 = Follower 12 is polled by the master.
1 = Follower 13 is polled by the master.
1 = Follower 14 is polled by the master.
in each
in each follower is on. See
sel.
in each follower are on.
in each follower are on.
are only effective when the
and
60.19 M/F comm supervision
specify the
is taken.
62.37 M/F
and 62.38 M/F communication
Def / Type
FbEq 16b / 32b
1
2
6.11
3
4
5
6
- / uint16
60.3