ABB ACS880 Firmware Manual page 465

No. Name / Range /
Selection
Torque
Speed
Frequency
50.5 FBA A ref2 type
50.7 FBA A actual 1 type
Auto
Transparent
General
Torque
Speed
Frequency
Position
50.8 FBA A actual 2 type
50.9 FBA A SW
transparent source
Not selected
Other [value]
50.10 FBA A act1
transparent source
Not selected
Other [value]
Description
The scaling is defined by parameter
The scaling is defined by parameter
The scaling is defined by parameter
scaling.
Selects the type and scaling of reference 2 received
from fieldbus adapter A.
See parameter 50.4 FBA A ref1
Selects the type/source and scaling of actual value 1
transmitted to the fieldbus network through fieldbus
adapter A.
Note: Fieldbus-specific communication profiles may
use different scalings. For more information, see the
manual of the fieldbus adapter.
Type/source and scaling follow the type of reference
1 selected by parameter
individual settings below for the sources and scalings.
The value selected by parameter
transparent source is sent as actual value 1. No scaling
is applied (the 16-bit scaling is 1 = 1 unit).
The value selected by parameter
transparent source is sent as actual value 1 with a 16-bit
scaling of 100 = 1 unit (ie. integer and two decimals).
1.10 Motor torque is sent as actual value 1. The scaling
is defined by parameter
1.1 Motor speed used is sent as actual value 1. The
scaling is defined by parameter
1.6 Output frequency is sent as actual value 1. The
scaling is defined by parameter
Motor position is sent as actual value 1. See parameter
90.6 Motor position scaled.
Selects the type/source and scaling of actual value 2
transmitted to the fieldbus network through fieldbus
adapter A.
See parameter 50.7 FBA A actual 1
Selects the source of the fieldbus status word when
the fieldbus adapter is set to a transparent
communication profile eg. by its configuration
parameters (group 51 FBA A
No source selected.
See Terms and abbreviations (page
When parameter 50.7 FBA A actual 1 type
Transparent or General, this parameter selects the
source of actual value 1 transmitted to the fieldbus
network through fieldbus adapter A.
No source selected.
See Terms and abbreviations (page
46.3 Torque scaling.
46.1 Speed scaling.
46.2 Frequency
type.
50.4 FBA A ref1 type. See the
50.10 FBA A act1
50.10 FBA A act1
46.3 Torque scaling.
46.1 Speed scaling.
46.2 Frequency scaling.
type.
settings).
169).
is set to
169).
Parameters 465
Def / Type
FbEq 16b / 32b
3
4
5
Auto / uint16
Auto / uint16
0
1
2
3
4
5
6
Auto / uint16
Not selected / uint32
0
Not selected / uint32
0