ABB ACS880 Firmware Manual page 490

490 Parameters
No. Name / Range /
Selection
60.3 M/F mode
Not in use
DDCS master
DDCS follower
D2D master
D2D follower
DDCS forcing
D2D forcing
60.5 M/F HW connection
Ring
Star
Description
Defines the role of the drive on the master/follower or
drive-to-drive link.
Master/follower functionality not active.
The drive is the master on the master/follower (DDCS)
link.
The drive is a follower on the master/follower (DDCS)
link.
The drive is the master on the master/follower (D2D)
link.
Note: This setting is only to be used with D2D
communication implemented by application
programming. If you are using the master/follower
functionality (see page 72) through the XD2D
connector, select DDCS master
The drive is a follower on the master/follower (D2D)
link.
Note: This setting is only to be used with D2D
communication implemented by application
programming. If you are using the master/follower
functionality (see page 72) through the XD2D
connector, select DDCS follower
The role of the drive on the master/follower (DDCS)
link is defined by parameters
60.16 Force follower.
The role of the drive on the master/follower (D2D) link
is defined by parameters
Force follower.
Note: This setting is only to be used with D2D
communication implemented by application
programming. If you are using the master/follower
functionality (see page 72) through the XD2D
connector, select DDCS forcing
Selects the topology of the master/follower link.
Note: Use the setting Star
functionality (see page 72) through the XD2D connector
(as opposed to a fiber optic link).
The devices are connected in a ring topology.
Forwarding of messages is enabled.
The devices are connected in a star topology (for
example, through a branching unit). Forwarding of
messages is disabled.
instead.
instead.
60.15 Force master
60.15 Force master and
instead.
if using the master/follower
Def / Type
FbEq 16b / 32b
Not in use / uint16
0
1
2
3
4
5
and
6
60.16
Ring / uint16
0
1