ABB ACS880 Firmware Manual page 497

No. Name / Range /
Selection
60.24 M/F status
supervision sel 2
b0 Follower 17
b1 Follower 18
b2 Follower 19
b3 Follower 20
b4 Follower 21
b5 Follower 22
b6 Follower 23
b7 Follower 24
b8 Follower 25
b9 Follower 26
b10 Follower 27
b11 Follower 28
b12 Follower 29
b13 Follower 30
b14 Follower 31
b15 Follower 32
0000h...FFFFh
60.27 M/F status supv
mode sel 1
b0 Follower 1
b1 Follower 2
b2 Follower 3
b3 Follower 4
Description
Selects the followers (out of followers 17...32) whose
status words are monitored by the D2D master.
Note: Also activate communication supervision for the
same followers in parameter
supervision sel 2.
See parameter 60.23 M/F status supervision sel
1 = Status of follower 17 is monitored.
1 = Status of follower 18 is monitored.
1 = Status of follower 19 is monitored.
1 = Status of follower 20 is monitored.
1 = Status of follower 21 is monitored.
1 = Status of follower 22 is monitored.
1 = Status of follower 23 is monitored.
1 = Status of follower 24 is monitored.
1 = Status of follower 25 is monitored.
1 = Status of follower 26 is monitored.
1 = Status of follower 27 is monitored.
1 = Status of follower 28 is monitored.
1 = Status of follower 29 is monitored.
1 = Status of follower 30 is monitored.
1 = Status of follower 31 is monitored.
1 = Status of follower 32 is monitored.
In the D2D master, parameters
mode sel 1 and 60.28 M/F status supv mode sel 2
specify the mode of follower status word monitoring.
Each follower can individually be set to be monitored
continuously, or only when it is in stopped state.
This parameter selects the mode of status word
monitoring of followers 1...16.
0 = Status of follower 1 is monitored continuously.
1 = Status of follower 1 is monitored only when it is in
stopped state.
0 = Status of follower 2 is monitored continuously.
1 = Status of follower 2 is monitored only when it is in
stopped state.
0 = Status of follower 3 is monitored continuously.
1 = Status of follower 3 is monitored only when it is in
stopped state.
0 = Status of follower 4 is monitored continuously.
1 = Status of follower 4 is monitored only when it is in
stopped state.
60.20 M/F comm
1.
60.27 M/F status supv
Parameters 497
Def / Type
FbEq 16b / 32b
- / uint16
1 = 1
- / uint16